Nippies Lift: How to Apply and Remove Adhesive Nipple Covers

Getting the Best Lift from Nippies Lift

Nippies Lift Adhesive Nipple Covers are designed for people who want a subtle lift without a bra. These ultra-thin silicone pasties stick directly to your skin and stay hidden under thin fabrics. The key to making them work — and last — is proper application and removal. This guide walks you through each step using the supplied instructions.

What You Get in the Box

• Nippies Lift Adhesive Nipple Covers: One pair of reusable silicone nipple covers in a chic travel box. Size: 3” (A-C cups). 100% Medical Grade Silicone. The size and silicone construction tell you these are meant for smaller busts and sensitive skin. The travel box helps preserve the shape and adhesive between uses.

  

How to Apply Nippies Lift

Start with clean, dry skin. Do not apply lotion, oil, or powder to the area beforehand — the adhesive needs a bare surface to stick securely.

1. Remove the tray and peel off the sheet: Take the nipple cover out of the travel box and carefully peel away the clear protective sheet. Keep that sheet — you'll need it later to store the covers.
2. Position the cup over your nipple: Center the silicone cup so your nipple sits in the middle of the concave shape. The entire edge should make contact with your skin.
3. Apply the cup and hold for 5 seconds: Press the cup firmly against your skin and hold for a full 5 seconds. This gives the adhesive time to bond. Do not move or shift the cover during this time.
4. Pull the tab up and smooth onto skin: Gently pull the small tab upward to create a slight lift, then smooth the rest of the cover onto your skin from the center outward. This helps remove any air bubbles and ensures the edges lie flat.

How to Remove Nippies Lift Safely

Removing silicone adhesive covers too quickly can tug at your skin. Take your time to avoid irritation and preserve the adhesive for reuse.

1. Loosen the edge gently: Start at the bottom or side edge. Use your fingertip to lift a small section of the cover away from your skin.
2. Peel slowly downward or outward: Peel the cover off gradually, keeping it parallel to your skin rather than pulling straight out. If you feel resistance, slow down or apply a little warm water to the edge to release the bond.
3. Remove any residue: After removing the cover, wash the skin with mild soap and water to remove any leftover adhesive. Pat dry — don't rub.

How to Clean and Reuse Nippies Lift

With proper care, these nipple covers can be reused multiple times. The supplied instructions specify washing after each use.

1. Wash with mild soap and water: After each wear, rinse the cover under lukewarm water and gently clean with a mild soap. Do not use alcohol, oils, or harsh cleansers — they can break down the adhesive.
2. Air dry completely: Let the covers air dry on a clean, lint-free surface. Do not use a towel or tissue to dry them — fibers can stick to the adhesive surface.
3. Re-apply the protective sheet and store in the tray: Once dry, place the clear protective sheet back over the adhesive side. Put the cover into the travel box tray to maintain its shape and protect the adhesive until your next use.

What the Instructions Don't Tell You

The supplied information covers the basics of application, removal, and care, but it does not specify how many uses you can expect from one pair, nor does it give exact storage temperatures. If you notice the adhesive losing its grip after several wears, that is normal for reusable silicone covers — the bond weakens with repeated washing. For best results, keep the covers in their travel box away from direct heat and humidity.